
As Low As $294/mo OAC
18' Intruder SterndriveStarting at: $30,540 / Payment: $294 mo oac
Alumaweld's exclusive Wide Ride Bottom™ makes these wonderful inboards refreshingly roomy! Available in 18', 20' and 22' lengths with your choice of inboard jet or sterndrive power, Intruder Inboards are ultra-strong sportfishers. Highly detailed and fully-equipped, Intruder Inboards are right-at-home when the demands are high.
| Standard Features |
Key Features |
- 1/3 Diamond Plate Pump Protector
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge and Water Separator Fuel Filter
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Lifting/Turning Strakes (14° Full Vee)
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel with 12-Volt Outlet
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering (on 18')
- Mercruiser Alpha Stern Drive
- Momo Steering Wheel
- Motor Cover Cushion
- Power Trim with Gauge
- Remote Throttle and Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Lifting/Turning Strakes (18° Full Vee)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Three-Blade Aluminum Prop
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld On Bow Chock, Polished Jam Cleat & Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
|
- 135 hp Mercruiser 3.0L
- Rogue Galvanized Trailer with Side Load Guides
- 3 Panel Walk-Thru Drop Curtain
- Intruder Sterndrive Standards
- Color Matched SeaMark™ Top and Side Curtains
- Built-In Fish Box
- 1/2 Outside Paint
- Windshield Wiper
- Sport Seating Package
- Rod Grippers
- Integrated Troller System
- Swing Tongue
- Advanced Ride System Bottom Vee
|
|
Specifications
| Hull Center Length |
18' 2" |
| Beam |
93" |
| Beam at Chine |
72" |
| Inside Freeboard |
25" |
| Side Height |
30" |
| Transom Height |
N/A320 |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
1,955# |
| Persons/Capacity |
5/750# |
| Weight Capacity |
1,300# |
| Fuel Capacity |
47 Gal |
| Max. HP Prop/Jet |
135 |
|
As Low As $325/mo OAC
18' Intruder Inboard 14°Starting at: $33,750 / Payment: $325 mo oac
Alumaweld's Intruder series, continues to be one of the most popular all-welded aluminum models in production. The reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out. Alumaweld's Intruder, the very best in all-seasons sport boating!
| Standard Features |
Key Features |
- 12-Volt Outlet
- American Turbine SD309 Pump (V6 / BC Impeller) (V8 / A Impeller)
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge & Water Separator Fuel Filter
- Chev 350 Carb, FWC (V8 Model)
- Chev 4.3L V6 Carb, FWC (V6 Models)
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel w/ Fuse Block
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering
- Merc Sportjet 175 (SJ)
- Momo Steering Wheel
- Motor Cover Cushion
- One Third Diamond Plate Pump Protector
- Remote Throttle & Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Length Lifting/Turning Strakes
- Sound Insulation Package
- Stainless Steel Hinges on Boxes & Storage Lids
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Thru Windshield with Metal Hinges
- Zolatone Interior
|
- 225 hp 4.3L Vortec Power
- Intruder Inboard Standards
- 14° Ride Master Vee Bottom
- 1/2 Outside Paint
- Integrated Troller System
- Sport Seating Package
- Built-In Fish Box
- Rod Grippers
- Color Matched SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Windshield Wiper
- Rogue Galvanized Trailer with Side Load Guides
|
|
Specifications
| Hull Center Length |
18' 2 |
| Beam |
89 |
| Beam at Chine |
70 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,020# |
| Persons/Capacity |
5/750# |
| Weight Capacity |
1,200# |
| Fuel Capacity |
47 Gal |
| Max. HP Prop/Jet |
330 |
|
As Low As $287/mo OAC
18' Intruder Outboard 14°Starting at: $29,800 / Payment: $287 mo oac
Alumaweld's Intruder Outboards are serious, all-seasons sport boats. Year-after-year, you'll marvel at their versatility as top flight fishing machines, family runabouts, vacation getaways, hunting platforms, and Sunday afternoon cruisers. Loaded from the factory with everything you need to go boating, the Intruder features a long list of standard items, along with plenty of storage and interior space. The Intruder reflects an uncommonly high level of fit and finish... an Alumaweld trademark. Alumaweld's Intruder Outboard continues to be one of the most popular all-welded aluminum models in production and the reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out.
| Standard Features |
Key Features |
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Built-In Fuel Tank with Gauge
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Length Lifting/Turning Strakes (14°)
- Four Polished Gunnel Cleats
- Momo Steering Wheel
- No-Feedback Steering (20' & 22' Model)
- Rod Grippers
- Running/Mooring Lights
- Saddle-Cut Transom
- Six Full Length Lifting/Turning Strakes (18°)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Switch Panel with Circuit Breakers and 12 Volt Outlet
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
|
- 90 hp Mercury ELPT Optimax
- Intruder Outboard Standards
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- 1/2 Outside Paint
- Built-In Fish Box
- Rod Grippers
- Sport Seating Package
- Swing Tongue
- Windshield Wiper
- Rogue Galvanized Trailer with Side Load Guides
|
|
Specifications
| Hull Center Length |
18' 2 |
| Beam |
93 |
| Beam at Chine |
72 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
20 |
| Deadrise |
14° A.R.S. |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
1,320# |
| Persons/Capacity |
4/600# |
| Weight Capacity |
900# |
| Fuel Capacity |
47 Gal |
| Max. HP Prop/Jet |
115/80 |
|
As Low As $334/mo OAC
18' Intruder Sportjet 14°Starting at: $34,590 / Payment: $334 mo oac
Alumaweld's exclusive Wide Ride Bottom™ makes these wonderful inboards refreshingly roomy! Available in 18', 20' and 22' lengths with your choice of inboard jet or sterndrive power, Intruder Inboards are ultra-strong sportfishers. Highly detailed and fully-equipped, Intruder Inboards are right-at-home when the demands are high.
| Standard Features |
Key Features |
- 12-Volt Outlet
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge & Water Separator Fuel Filter
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel w/ Fuse Block
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering
- Momo Steering Wheel
- Motor Cover Cushion
- One Third Diamond Plate Pump Protector
- Remote Throttle & Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Length Lifting/Turning Strakes
- Sound Insulation Package
- Stainless Steel Hinges on Boxes & Storage Lids
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Thru Windshield with Metal Hinges
- Zolatone Interior
|
- 200 hp Mercury Optimax Sportjet
- Intruder Sportjet Standards
- 14° Ride Master Vee Bottom
- Built-In Fish Box
- Sport Seating Package
- 1/2 Outside Paint
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Windshield Wiper
- Integrated Troller System
- Swing tongue
- Rogue Galvanized Trailer with Side Load Guides
|
|
Specifications
| Hull Center Length |
18' 2 |
| Beam |
93 |
| Beam at Chine |
72 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
1,520# |
| Persons/Capacity |
5/750# |
| Weight Capacity |
1,200# |
| Fuel Capacity |
47 Gal |
| Max. HP Prop/Jet |
175 |
|
As Low As $338/mo OAC
20' Intruder Inboard 14°Starting at: $36,995 / Payment: $338 mo oac
Now with 33" sides! Alumaweld's 20' Intruder Inboard Jet series, continues to be one of the most popular all-welded aluminum models in production. The reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out. Alumaweld's Inboard Jet Intruders reflect the very best in all-seasons sport boating! Shallow water, deep water, freshwater or in the salt...these are boats that will take you as far as your dreams allow! From the 14 degree bottom to the 82" wide bottom, Alumaweld's Inboard Intruder series is perfectly designed for serious outdoor fun....take a ride today and see why Alumaweld's reputation for superior performance is earned not hyped.
| Standard Features |
Key Features |
- 12-Volt Outlet
- American Turbine SD309 Pump (V6 / BC Impeller) (V8 / A Impeller)
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge & Water Separator Fuel Filter
- Chev 350 Carb, FWC (V8 Model)
- Chev 4.3L V6 Carb, FWC (V6 Models)
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel w/ Fuse Block
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering
- Merc Sportjet 175 (SJ)
- Momo Steering Wheel
- Motor Cover Cushion
- One Third Diamond Plate Pump Protector
- Remote Throttle & Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Length Lifting/Turning Strakes
- Sound Insulation Package
- Stainless Steel Hinges on Boxes & Storage Lids
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Thru Windshield with Metal Hinges
- Zolatone Interior
|
- 310 hp 5.7L Vortec Power
- Intruder Inboard Standards
- 14° Ride Master Vee Bottom
- 1/2 Outside Paint
- Integrated Troller System
- Sport Seating Package
- Built-In Fish Box
- Rod Grippers
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Windshield Wiper
- Rogue Galvanized Trailer with Side Load Guides
- Trailer Brakes
|
|
Specifications
| Hull Center Length |
20' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
33 |
| Transom Height |
N/A |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,260# |
| Persons/Capacity |
6/900# |
| Weight Capacity |
1,700# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
330 |
|
As Low As $307/mo OAC
20' Intruder Outboard 18°Starting at: $33,665 / Payment: $307 mo oac
Now with 33" sides! Alumaweld's Intruder Outboards are serious, all-seasons sport boats. Year-after-year, you'll marvel at their versatility as top flight fishing machines, family runabouts, vacation getaways, hunting platforms, and Sunday afternoon cruisers. Loaded from the factory with everything you need to go boating, the Intruder features a long list of standard items, along with plenty of storage and interior space. The Intruder reflects an uncommonly high level of fit and finish... an Alumaweld trademark. Alumaweld's Intruder Outboard continues to be one of the most popular all-welded aluminum models in production and the reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out.
| Standard Features |
Key Features |
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Built-In Fuel Tank with Gauge
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Length Lifting/Turning Strakes (14°)
- Four Polished Gunnel Cleats
- Momo Steering Wheel
- No-Feedback Steering (20' & 22' Model)
- Rod Grippers
- Running/Mooring Lights
- Saddle-Cut Transom
- Six Full Length Lifting/Turning Strakes (18°)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Switch Panel with Circuit Breakers and 12 Volt Outlet
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
|
- 115 hp Mercury EXLPT Optimax
- Intruder Outboard Standards
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Driver Side Wiper
- 1/2 Outside Paint
- Built-In Fish Box
- Rod Grippers
- Sport Seating Package
- Swing Tongue
- Windshield Wiper
- Rogue Galvanized Trailer with Side Load Guides
- Trailer Brakes
|
|
Specifications
| Hull Center Length |
20' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
33 |
| Transom Height |
20 |
| Deadrise |
18° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
1,845# |
| Persons/Capacity |
6/900# |
| Weight Capacity |
1,700# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
200 |
|
As Low As $333/mo OAC
20' Intruder Sportjet 14°Starting at: $36,495 / Payment: $333 mo oac
The 20' Intruder SportJet reflects the good sense, integrity and experience that's placed Alumaweld as the leading manufacturer of all-welded heavy gauge aluminum boats in the world! Alumaweld's exclusive Wide Ride Bottom™ makes these wonderful inboards refreshingly roomy! At 200 horsepower, the SportJet power package is loaded with get-up and go and capable of running shallow riffles or heaving whitewater. This package is truly a "sport boat" designed for a broad range of applications it's a thorough-bred outdoor fun machine that's balanced, finished, agile and detailed. The 20' Intruder Sportjet represents a special class of boats bent on taming wild water and exploring remote getaways.
| Standard Features |
Key Features |
- 12-Volt Outlet
- American Turbine SD309 Pump (V6 / BC Impeller) (V8 / A Impeller)
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge & Water Separator Fuel Filter
- Chev 350 Carb, FWC (V8 Model)
- Chev 4.3L V6 Carb, FWC (V6 Models)
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel w/ Fuse Block
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering
- Merc Sportjet 175 (SJ)
- Momo Steering Wheel
- Motor Cover Cushion
- One Third Diamond Plate Pump Protector
- Remote Throttle & Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Length Lifting/Turning Strakes
- Sound Insulation Package
- Stainless Steel Hinges on Boxes & Storage Lids
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Thru Windshield with Metal Hinges
- Zolatone Interior
|
- 200 hp Mercury Optimax Sportjet
- Intruder Sportjet Standards
- 14° Ride Master Vee Bottom
- Built-In Fish Box
- Sport Seating Package
- 1/2 Outside Paint
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Windshield Wiper
- Integrated Troller System
- Swing Tongue
- Rogue Galvanized Trailer with Side Load Guides
|
|
Specifications
| Hull Center Length |
20' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
1,760# |
| Persons/Capacity |
6/900# |
| Weight Capacity |
1,700# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
200 |
|
As Low As $326/mo OAC
20' Intruder Sterndrive 18°Starting at: $35,695 / Payment: $326 mo oac
Alumaweld's 20' Intruder Sterndrive is a rare breed of boat. Designed for serious fishing, this package is loaded with power, comfort and welcome space. An 82" wide bottom opens this boat up perfectly for big water fishing and the Advanced Ride System bottom vee delivers a level of ride that's unchallenged and a pleasure to run. Intruder Sterndrives are right-at-home when the demands are high. No other heavy gauge welded aluminum boat builder designs as nice a sterndrive as Alumaweld...maybe that's why they're the most popular sterndrives in their class!
| Standard Features |
Key Features |
- 1/3 Diamond Plate Pump Protector
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge and Water Separator Fuel Filter
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Lifting/Turning Strakes (14° Full Vee)
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel with 12-Volt Outlet
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering (on 18')
- Mercruiser Alpha Stern Drive
- Momo Steering Wheel
- Motor Cover Cushion
- Power Trim with Gauge
- Remote Throttle and Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Lifting/Turning Strakes (18° Full Vee)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Three-Blade Aluminum Prop
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld On Bow Chock, Polished Jam Cleat & Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
|
- 190 hp Mercruiser 4.3L
- 3 Panel Walk-Thru Drop Curtain
- Intruder Sterndrive Standards
- Color Matched SeaMark™ Top and Side Curtains
- Built-In Fish Box
- 1/2 Outside Paint
- Integrated Troller System
- Sport Seating Package
- Rod Grippers
- Windshield Wiper
- Rogue Galvanized Trailer with Side Load Guides
- Trailer Brakes
- Advanced Ride System Bottom Vee
|
|
Specifications
| Hull Center Length |
20' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
18° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,260# |
| Persons/Capacity |
6/900# |
| Weight Capacity |
1,700# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
190 |
|
As Low As $378/mo OAC
22' Intruder Inboard 14°Starting at: $38,995 / Payment: $378 mo oac
Now with 33" sides! Alumaweld's 22' Intruder Inboard Jet series, continues to be one of the most popular all-welded aluminum models in production. The reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out. Alumaweld's Inboard Jet Intruders reflect the very best in all-seasons sport boating! Shallow water, deep water, freshwater or in the salt...these are boats that will take you as far as your dreams allow! From the 14 degree bottom to the 82" wide bottom, Alumaweld's Inboard Intruder series is perfectly designed for serious outdoor fun....take a ride today and see why Alumaweld's reputation for superior performance is earned not hyped.
| Standard Features |
Key Features |
- 12-Volt Outlet
- American Turbine SD309 Pump (V6 / BC Impeller) (V8 / A Impeller)
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge & Water Separator Fuel Filter
- Chev 350 Carb, FWC (V8 Model)
- Chev 4.3L V6 Carb, FWC (V6 Models)
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel w/ Fuse Block
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering
- Merc Sportjet 175 (SJ)
- Momo Steering Wheel
- Motor Cover Cushion
- One Third Diamond Plate Pump Protector
- Remote Throttle & Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Length Lifting/Turning Strakes
- Sound Insulation Package
- Stainless Steel Hinges on Boxes & Storage Lids
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Thru Windshield with Metal Hinges
- Zolatone Interior
|
- 310 hp 5.7L Vortec Power
- Intruder Inboard Standards
- 14° Ride Master Vee Bottom
- 1/2 Outside Paint
- Integrated Troller System
- Sport Seating Package
- Built-In Fish Box
- Rod Grippers
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Windshield Wiper
- Rogue Galvanized T/A Trailer with Side Load Guides
- Trailer Brakes
|
|
Specifications
| Hull Center Length |
22' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
14° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,350# |
| Persons/Capacity |
8/1,200# |
| Weight Capacity |
1,900# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
390 |
|
As Low As $345/mo OAC
22' Intruder Outboard 18°Starting at: $34,995 / Payment: $345 mo oac
No with 33" sides! Alumaweld's Intruder Outboards are serious, all-seasons sport boats. Year-after-year, you'll marvel at their versatility as top flight fishing machines, family runabouts, vacation getaways, hunting platforms, and Sunday afternoon cruisers. Loaded from the factory with everything you need to go boating, the Intruder features a long list of standard items, along with plenty of storage and interior space. The Intruder reflects an uncommonly high level of fit and finish... an Alumaweld trademark. Alumaweld's Intruder Outboard continues to be one of the most popular all-welded aluminum models in production and the reason is clear... they satisfy the demands of serious sport boaters, year-in and year-out.
| Standard Features |
Key Features |
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Built-In Fuel Tank with Gauge
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Length Lifting/Turning Strakes (14°)
- Four Polished Gunnel Cleats
- Momo Steering Wheel
- No-Feedback Steering (20' & 22' Model)
- Rod Grippers
- Running/Mooring Lights
- Saddle-Cut Transom
- Six Full Length Lifting/Turning Strakes (18°)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Switch Panel with Circuit Breakers and 12 Volt Outlet
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld on Bow Chock, Polished Jam Cleat and Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
` |
- 115 hp Mercury EXLPT Optimax
- Intruder Outboard Standards
- SeaMark™ Top and Side Curtains
- 3 Panel Walk-Thru Drop Curtain
- Driver side wiper
- 1/2 Outside Paint
- Built-In Fish Box
- Rod Grippers
- Sport Seating Package
- Swing Tongue
- Windshield Wiper
- Rogue Galvanized T/A Trailer with Side Load Guides
- Trailer Brakes
|
|
Specifications
| Hull Center Length |
22' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
33 |
| Transom Height |
25 |
| Deadrise |
18° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,025# |
| Persons/Capacity |
8/1,200# |
| Weight Capacity |
1,900# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
225 |
|
As Low As $374/mo OAC
22' Intruder Sterndrive 18°Starting at: $37,995 / Payment: $374 mo oac
Alumaweld's 22' Intruder Sterndrive is a rare breed of boat. Designed for serious fishing, this package is loaded with power, comfort and welcome space. An 82" Wide Ride bottom opens this boat up perfectly for big water fishing and the Advanced Ride System bottom vee delivers a level of ride that's unchallenged and a pleasure to run. Intruder Sterndrives are right-at-home when the demands are high. No other heavy gauge welded aluminum boat builder designs as nice a sterndrive as Alumaweld...maybe that's why they're the most popular sterndrives in their class!
| Standard Features |
Key Features |
- 1/3 Diamond Plate Pump Protector
- Armor Tech™ Premium Floorboards with Outdoor Wear™ non-skid Vinyl Covering
- Battery with Tray
- Bilge Blower
- Built-In Fuel Tank with Gauge and Water Separator Fuel Filter
- Continuously Welded Box Girder Construction
- Electric Bilge Pump
- Electric Horn
- Exclusive Lifetime Warranty
- Fish Box in Step Deck
- Four Full Lifting/Turning Strakes (14° Full Vee)
- Four Polished Gunnel Cleats
- Full Instrumentation Dash Panel with 12-Volt Outlet
- Hour Meter
- Insulated, Welded Aluminum Motor Cover
- Mechanical Steering (on 18')
- Mercruiser Alpha Stern Drive
- Momo Steering Wheel
- Motor Cover Cushion
- Power Trim with Gauge
- Remote Throttle and Shift Control
- Rod Grippers
- Running / Mooring Lights
- Six Full Lifting/Turning Strakes (18° Full Vee)
- Sound Insulation Package
- Stainless Steel Hinges on Boxes and Storage Lids
- Three-Blade Aluminum Prop
- Transducer Bracket
- Two Folding Sportsman's Seats on Water-Tight Lockable Storage Boxes
- U.S. Coast Guard Approved Flotation
- Vinyl Graphics
- Weld On Bow Chock, Polished Jam Cleat & Polished Cleat on Inner Gunnel
- Weld on Polished Aluminum Stern Eyes
- Welded Aluminum Bow Rails
- Welded Aluminum Glove Box with Lockable Door
- Welded Walk-Through Windshield
- Zolatone Interior
|
- 220 hp Mercruiser 5.0L
- Intruder Sterndrive Standards
- Color Matched SeaMark™ Top and Side Curtains
- Built-In Fish Box
- 1/2 Outside Paint
- Integrated Troller System
- Sport Seating Package
- Rod Grippers
- Windshield Wiper
- 3 Panel Walk-Thru Drop Curtain
- Rogue Galvanized T/A Trailer with Side Load Guides
- Trailer Brakes
- Advanced Ride System Bottom Vee
|
|
Specifications
| Hull Center Length |
22' 1 |
| Beam |
98 |
| Beam at Chine |
82 |
| Inside Freeboard |
25 |
| Side Height |
30 |
| Transom Height |
N/A |
| Deadrise |
18° |
| Bottom Thickness |
0.190 |
| Side Thickness |
0.125 |
| Approx. Weight |
2,350# |
| Persons/Capacity |
8/1,200# |
| Weight Capacity |
1,900# |
| Fuel Capacity |
60 Gal |
| Max. HP Prop/Jet |
300 |
|
Prices, specifications and features subject to change without notice.
|
|
 |