2023 Brix Hammer Cat 3814-CTC

2023 Brix Hammer Cat 3814-CTC

Powered by the exceptional twin Mercury V12 600 HP outboards, this meticulously crafted catamaran is designed to redefine the offshore boating experience, prioritizing both performance and functionality.

BRIX MARINE HULL
Length 38' : Beam 14'
5086 alloy aluminum hull skins
5052 alloy aluminum interior transverse frames
Longitudinal t-bars
Longitudinal hull stiffeners
Floor framed on 26" centers
Self bailing aluminum decks
3814-CTC Offshore SWA
Upgrade model from 3814-CTC SWA to 3814-CTC Offshore SWA
Offshore model extends both the aft deck & LOA by approx. 32"
with addition of offshore brackets for outboards.
T transom does not support a fish locker in the offshore model
Tandem offshore brackets designed for 35" outboard shaft length
Modify offshore brackets to extend to outside plate & angled to gunnel height

BEACHCOMBER landing gear
Foot traffic only
Aluminum drop bow door
SS door retainer clip
WARN DC800 industrial hoist, black 12V
Hull beaching plates

Deck Accessories
Extended T-transom c/w hinged aluminum gate
Hand rails fore & aft deck
Roof access ladder c/w flat rungs
(2) Side boarding doors (port & stbd)
Folding SS gunnel step (port side)
Gunnel trays aft deck (port & stbd)
(1) Hull access hatch c/w gas strut & flush hinges & ladder
(1) Generator access hatch c/w gas strut, flush hinges & ladder
(2) Fish storage lockers insulated c/w gas struts, flush hinges & macerator for discharge
(2) Battery lockers c/w hinged doors, vents & drainage ports
Compression latch, 316 SS, locking
(2) Fish cleaning stations c/w two drawers (black) & overboard gut chute (1 port & 1 stbd)
Approx. 52" x 30"
Top cambered toward overboard gut chute
360 degree fiddle w/ stepped down fiddle height at working edge
Removable starboard cutting surface (black)
Hidden magnetic knife keep on aft, inboard corner
(5) Welded aluminum rod holders on aft edge
Second station c/w hinged door & latch
(2) Watertight 12" round liftout hatches in outboard well
(8) 11" tie up cleats
(1) 8" tie up cleat
Anodes for cathodic protection
Swim ladder - deploys from under T-transom & includes vertical hand rails
Alaskan overhang roof extension
(9) Aluminum rod holders (locations TBD)
(4) Aluminum coat hooks under exterior overhang
Sink c/w mixer faucet on the aft deck (port side)
(2) Downrigger pads (locations per drawing wired for Scotty)
Removable aluminum tow post c/w stowage bracket in the outboard well
Install OFE 80 gallon X-tream bait tank includes; Through deck soft patches for water &
electrical connections. Bolt on "Tank Stays" from manufacturer c/w helicoil deck fittings.
Separate raw water supply pump w/ thru hull & strainer. Overflow raw water to side
thru hull c/w ball valve. DC control panel for pumps & tank lights located at aft station.
UMT ECO 600 roof mounted dingy davit c/w roof mounted
AB Inflatable c/w Yamaha 15hp motor, tiller, prop - includes fuel tank, lifting sling, chock pads
Lammina 10AL inflatable dinghy
Yamaha 15hp outboard w/ prop
Fuel tank - 6 gallon bow tank
Universal Dinghy chocks
SS ratchet straps x 10'
Sling
Crab pot puller w/ 12v plug
Electra-Dyne 12V pot puller (250lb max load)
ED7500-10 XHD w/ SS disc (20:1) 290 FPM max
SS Davit (removable) c/w gunnel grommet
Open block, fairlead roller, rope deflector & hand control included

CUSTOM EXTERIOR COVERS
Custom aft station cover Stamoid Black c/w SS fasteners & PTFE thread.
Custom Fly bridge helm station cover Stamoid Black c/w SS fasteners & PTFE thread.
Custom Fly bridge helm chair cover, Stamoid Black c/w SS fasteners & PTFE thread
Custom Fly bridge bench covers 1-port, 1-stbd, Stamoid Black c/w SS fasteners & PTFE thread.

STARBOARD-WALK-AROUND CABIN
BRIX Headliner: fully insulated with easy to clean white fiber

• 
• 
• 
• 
• 
• 
• 

Get an Estimate for Your Payment

• Payment Frequency: Bi-Weekly Monthly
• Vehicle Price
• Down Payment
• Interest Rate
• Loan Term In Years 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
• Calculate  Reset
• Estimated Payment

• Calculation is estimate only.